- Overview
- Product Description
- Working Principle
- Product Features
- Applications
- Product Parameters
- Company Profile
Basic Info.
Product Description
Conduct oil heat (steam) drying drum dryer belongs to indirect heating mode, the heat conduction oil or steam drying heat, this type of dryer has low energy consumption of drying, the safety drying process,the material is not affected by heat source pollution etc.,which are widely used in the biomass, food, feed, fertilizer, bad slag chemical industry, medicine, coal, mining and other small particles or weakly caking dry powder material.
The heat transfer oil (steam) tumble dryer is mainly composed of a tube heat exchanger, a heat source inlet and outlet center pipe, a rotary drum, a feeder and a discharger, an induced draft fan, a dust collector and a power distribution cabinet. The wet material is fed into the dryer, and under the evenly distributed lifting plates and tubes in the drum, it is fully contacted with the heat transfer oil (steam) tube heat exchanger to achieve heat and mass transfer (110-250ºC) Constant temperature drying, the moisture in the material is vaporized and dispersed, and discharged with the airflow, the moisture in the material is gradually reduced, and the material is dried.
1. The single-layer rotary tumble dryer has the characteristics of high degree of mechanization, strong anti-overload ability, large processing capacity, and continuous operation;
2. After the heat transfer oil (or steam) heated at about 300°C undergoes heat exchange in the dryer, the low temperature heat transfer oil (condensed water) flows back into the heat transfer oil furnace (steam boiler) for reheating, recycling, and the heat is fully utilized. loss, drying energy consumption is 20-40% lower than that of ordinary dryers;
3. The heat transfer oil (steam) tumble dryer belongs to the indirect heating mode drying, the material and the heat source are not in direct contact, the drying process is closed and the material is clean and free from any pollution;
4. The drying process temperature of 110-250°C can be adjusted arbitrarily according to the characteristics of the material. It can adopt the co-current drying process or the counter-current drying process. It belongs to low temperature and constant temperature drying, and the material drying process is safer;
5. The structure is excellent, simple, the resistance of the material passing through the cylinder is small, the operation is stable and the operation is convenient.
6. Wide application range and good drying uniformity.
Generally used in chemical industry, coal mine, grain, factory construction, printing and dyeing, textile, hotel linen and other industries.
| Equipment Specifications | JTHT1210 | JTHT1412 | JTHT1615 | JTHT1918 | JTHT2218 | JTHT2523 | JTHT2925 |
| Daily output (t/d) | 17-40 | 28-61 | 50-100 | 65-150 | 88-200 | 132-300 | 180-400 |
| Evaporation water capacity (t/h) | 0.3-0.4 | 0.5-0.6 | 0.9-1.0 | 1.2-1.5 | 1.6-2.0 | 2.4-3.0 | 3.3-4.0 |
| Raw material moisture (%) | 35-50 | ||||||
| Dry material moisture (%) | 12-15 | ||||||
| Drying temperature (ºC) | 110-250ºC | ||||||
| Total installed capacity(kw) | 20-28 | 25-35 | 30-50 | 40-60 | 50-80 | 70-100 | 90-140 |
| Equipment footprint (m2) | 5m×15m | 5m×18m | 6m×20m | 7m×25m | 8m×25m | 10m×30m | 10m×35m |
Zhengzhou Jiutian Machinery Equipment Co., Ltd. dryer products cover all kinds of drying machine products such as coal slime, dregs, biomass, organic fertilizer, sludge, yeast, coconut fiber and chaff, and coconut. At present, the company not only has a huge customer resource system and considerable market share in the country but also in the UK, Russia, Greece, Italy, Israel, Morocco, Congo, Egypt, Côte d'Ivoire, Madagascar, Australia, India, Vietnam, Laos, Indonesia, Malaysia. In many overseas countries such as Sri Lanka, Chile, and the United States, the dryer case was established and successfully put into operation, and the quality and technology of the dryer products were in line with international standards.
Q: What is your Business Model? Trading company or factory?
A: We are a 18 years factory, all our machinery is manufactured by ourselves, factory direct sales, product quality, and after-sales service can be guaranteed.
Q: Can I visit your factory?
A: Yes. Many domestic and international customers visit our factory every year. Our company is located in Zhengzhou Henan province, China, you can come here by air or train.
The nearest airport is Zhengzhou Xinzheng International Airport, and the Airport Code is CGO.
We will pick you up at the airport. Welcome to visit our factory.
Q: What is the Quality of your products?
A: Zhengzhou Jiutian products come with the best quality, and our products passed CE certification, exported to lots countries around the world, such as Australia, Malaysia, India, Italy, Indonesia, Vietnam, Philippines, Korea, Brazil, Argentina, Russia, South Africa, etc. You can rest assured of the quality absolutely.
Q: How long is the Warranty of your equipment?
A: Our warranty period is one year generally.
